javax.xml.soap
Class AttachmentPart

java.lang.Object
  javax.xml.soap.AttachmentPart

Direct Known Subclasses:

AttachmentPartImpl

public abstract class AttachmentPart
extends java.lang.Object

A single attachment to a SOAPMessage object. A SOAPMessage object may contain zero, one, or many AttachmentPart objects. Each AttachmentPart object consists of two parts, application-specific content and associated MIME headers. The MIME headers consists of name/value pairs that can be used to identify and describe the content.

An AttachmentPart object must conform to certain standards.

1. It must conform to MIME [RFC2045] standards
2. It MUST contain content
3. The header portion MUST include the following header:
   • Content-Type
     This header identifies the type of data in the content of an AttachmentPart object and MUST conform to [RFC2045]. The following is an example of a Content-Type header:

      Content-Type:  application/xml
      
     
      

     The following line of code, in which ap is an AttachmentPart object, sets the header shown in the previous example.

      ap.setMimeHeader("Content-Type",
      "application/xml");
      
     
      

There are no restrictions on the content portion of an AttachmentPart object. The content may be anything from a simple plain text object to a complex XML document or image file.

An AttachmentPart object is created with the method SOAPMessage.createAttachmentPart. After setting its MIME headers, the AttachmentPart object is added to the message that created it with the method SOAPMessage.addAttachmentPart.

The following code fragment, in which m is a SOAPMessage object and contentStringl is a String, creates an instance of AttachmentPart, sets the AttachmentPart object with some content and header information, and adds the AttachmentPart object to the SOAPMessage object.

 AttachmentPart ap1 = m.createAttachmentPart(); ap1.setContent(contentString1,
 "text/plain"); m.addAttachmentPart(ap1); 

The following code fragment creates and adds a second AttachmentPart instance to the same message. jpegData is a binary byte buffer representing the jpeg file.

 AttachmentPart ap2 = m.createAttachmentPart(); byte[] jpegData =  ...; ap2.setContent(new
 ByteArrayInputStream(jpegData), "image/jpeg"); m.addAttachmentPart(ap2); 

The getContent method retrieves the contents and header from an AttachmentPart object. Depending on the DataContentHandler objects present, the returned Object can either be a typed Java object corresponding to the MIME type or an InputStream object that contains the content as bytes.

 String content1 = ap1.getContent(); java.io.InputStream content2 = ap2.getContent(); 

The method clearContent removes all the content from an AttachmentPart object but does not affect its header information.

 ap1.clearContent(); 

Constructor Summary

AttachmentPart()
Create a new AttachmentPart.

Method Summary

abstract void	addMimeHeader(java.lang.String name, java.lang.String value) Adds a MIME header with the specified name and value to this AttachmentPart object.
abstract void	clearContent() Clears out the content of this AttachmentPart object.
abstract java.util.Iterator	getAllMimeHeaders() Retrieves all the headers for this AttachmentPart object as an iterator over the MimeHeader objects.
abstract java.io.InputStream	getBase64Content()
abstract java.lang.Object	getContent() Gets the content of this AttachmentPart object as a Java object.
java.lang.String	getContentId() Gets the value of the MIME header whose name is "Content-Id".
java.lang.String	getContentLocation() Gets the value of the MIME header "Content-Location".
java.lang.String	getContentType() Gets the value of the MIME header "Content-Type".
abstract javax.activation.DataHandler	getDataHandler() Gets the DataHandler object for this AttachmentPart object.
abstract java.util.Iterator	getMatchingMimeHeaders(java.lang.String[] names) Retrieves all MimeHeader objects that match a name in the given array.
abstract java.lang.String[]	getMimeHeader(java.lang.String name) Gets all the values of the header identified by the given String.
abstract java.util.Iterator	getNonMatchingMimeHeaders(java.lang.String[] names) Retrieves all MimeHeader objects whose name does not match a name in the given array.
abstract java.io.InputStream	getRawContent()
abstract byte[]	getRawContentBytes()
abstract int	getSize() Returns the number of bytes in this AttachmentPart object.
abstract void	removeAllMimeHeaders() Removes all the MIME header entries.
abstract void	removeMimeHeader(java.lang.String header) Removes all MIME headers that match the given name.
abstract void	setBase64Content(java.io.InputStream inputstream, java.lang.String s)
abstract void	setContent(java.lang.Object object, java.lang.String contentType) Sets the content of this attachment part to that of the given Object and sets the value of the Content-Type header to the given type.
void	setContentId(java.lang.String contentId) Sets the MIME header "Content-Id" with the given value.
void	setContentLocation(java.lang.String contentLocation) Sets the MIME header "Content-Location" with the given value.
void	setContentType(java.lang.String contentType) Sets the MIME header "Content-Type" with the given value.
abstract void	setDataHandler(javax.activation.DataHandler datahandler) Sets the given DataHandler object as the data handler for this AttachmentPart object.
abstract void	setMimeHeader(java.lang.String name, java.lang.String value) Changes the first header entry that matches the given name to the given value, adding a new header if no existing header matches.
abstract void	setRawContent(java.io.InputStream inputstream, java.lang.String s)
abstract void	setRawContentBytes(byte[] abyte0, int i, int j, java.lang.String s)

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

AttachmentPart

public AttachmentPart()

Create a new AttachmentPart.

Method Detail

getSize

public abstract int getSize()
                     throws SOAPException

Returns the number of bytes in this AttachmentPart object.

Returns:

the size of this AttachmentPart object in bytes or -1 if the size cannot be determined

Throws:

SOAPException - if the content of this attachment is corrupted of if there was an exception while trying to determine the size.

clearContent

public abstract void clearContent()

Clears out the content of this AttachmentPart object. The MIME header portion is left untouched.

getContent

public abstract java.lang.Object getContent()
                                     throws SOAPException

Gets the content of this AttachmentPart object as a Java object. The type of the returned Java object depends on (1) the DataContentHandler object that is used to interpret the bytes and (2) the Content-Type given in the header.

For the MIME content types "text/plain", "text/html" and "text/xml", the DataContentHandler object does the conversions to and from the Java types corresponding to the MIME types. For other MIME types,the DataContentHandler object can return an InputStream object that contains the content data as raw bytes.

A JAXM-compliant implementation must, as a minimum, return a java.lang.String object corresponding to any content stream with a Content-Type value of text/plain, a javax.xml.transform.StreamSource object corresponding to a content stream with a Content-Type value of text/xml, a java.awt.Image object corresponding to a content stream with a Content-Type value of image/gif or image/jpeg. For those content types that an installed DataContentHandler object does not understand, the DataContentHandler object is required to return a java.io.InputStream object with the raw bytes.

Returns:

a Java object with the content of this AttachmentPart object

Throws:

SOAPException - if there is no content set into this AttachmentPart object or if there was a data transformation error

setContent

public abstract void setContent(java.lang.Object object,
                                java.lang.String contentType)

Sets the content of this attachment part to that of the given Object and sets the value of the Content-Type header to the given type. The type of the Object should correspond to the value given for the Content-Type. This depends on the particular set of DataContentHandler objects in use.

Parameters:

object - the Java object that makes up the content for this attachment part

contentType - the MIME string that specifies the type of the content

Throws:

java.lang.IllegalArgumentException - if the contentType does not match the type of the content object, or if there was no DataContentHandler object for this content object

See Also:

getContent()

getDataHandler

public abstract javax.activation.DataHandler getDataHandler()
                                                     throws SOAPException

Gets the DataHandler object for this AttachmentPart object.

Returns:

the DataHandler object associated with this AttachmentPart object

Throws:

SOAPException - if there is no data in this AttachmentPart object

setDataHandler

public abstract void setDataHandler(javax.activation.DataHandler datahandler)

Sets the given DataHandler object as the data handler for this AttachmentPart object. Typically, on an incoming message, the data handler is automatically set. When a message is being created and populated with content, the setDataHandler method can be used to get data from various data sources into the message.

Parameters:

datahandler - DataHandler object to be set

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified DataHandler object

getContentId

public java.lang.String getContentId()

Gets the value of the MIME header whose name is "Content-Id".

Returns:

a String giving the value of the "Content-Id" header or null if there is none

See Also:

setContentId(java.lang.String)

getContentLocation

public java.lang.String getContentLocation()

Gets the value of the MIME header "Content-Location".

Returns:

a String giving the value of the "Content-Location" header or null if there is none

getContentType

public java.lang.String getContentType()

Gets the value of the MIME header "Content-Type".

Returns:

a String giving the value of the "Content-Type" header or null if there is none

setContentId

public void setContentId(java.lang.String contentId)

Sets the MIME header "Content-Id" with the given value.

Parameters:

contentId - a String giving the value of the "Content-Id" header

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified contentId value

See Also:

getContentId()

setContentLocation

public void setContentLocation(java.lang.String contentLocation)

Sets the MIME header "Content-Location" with the given value.

Parameters:

contentLocation - a String giving the value of the "Content-Location" header

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified content location

setContentType

public void setContentType(java.lang.String contentType)

Sets the MIME header "Content-Type" with the given value.

Parameters:

contentType - a String giving the value of the "Content-Type" header

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified content type

removeMimeHeader

public abstract void removeMimeHeader(java.lang.String header)

Removes all MIME headers that match the given name.

Parameters:

header - - the string name of the MIME header/s to be removed

removeAllMimeHeaders

public abstract void removeAllMimeHeaders()

Removes all the MIME header entries.

getMimeHeader

public abstract java.lang.String[] getMimeHeader(java.lang.String name)

Gets all the values of the header identified by the given String.

Parameters:

name - the name of the header; example: "Content-Type"

Returns:

a String array giving the value for the specified header

See Also:

setMimeHeader(java.lang.String, java.lang.String)

setMimeHeader

public abstract void setMimeHeader(java.lang.String name,
                                   java.lang.String value)

Changes the first header entry that matches the given name to the given value, adding a new header if no existing header matches. This method also removes all matching headers but the first.

Note that RFC822 headers can only contain US-ASCII characters.

Parameters:

name - a String giving the name of the header for which to search

value - a String giving the value to be set for the header whose name matches the given name

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified mime header name or value

addMimeHeader

public abstract void addMimeHeader(java.lang.String name,
                                   java.lang.String value)

Adds a MIME header with the specified name and value to this AttachmentPart object.

Note that RFC822 headers can contain only US-ASCII characters.

Parameters:

name - a String giving the name of the header to be added

value - a String giving the value of the header to be added

Throws:

java.lang.IllegalArgumentException - if there was a problem with the specified mime header name or value

getAllMimeHeaders

public abstract java.util.Iterator getAllMimeHeaders()

Retrieves all the headers for this AttachmentPart object as an iterator over the MimeHeader objects.

Returns:

an Iterator object with all of the Mime headers for this AttachmentPart object

getMatchingMimeHeaders

public abstract java.util.Iterator getMatchingMimeHeaders(java.lang.String[] names)

Retrieves all MimeHeader objects that match a name in the given array.

Parameters:

names - a String array with the name(s) of the MIME headers to be returned

Returns:

all of the MIME headers that match one of the names in the given array as an Iterator object

getNonMatchingMimeHeaders

public abstract java.util.Iterator getNonMatchingMimeHeaders(java.lang.String[] names)

Retrieves all MimeHeader objects whose name does not match a name in the given array.

Parameters:

names - a String array with the name(s) of the MIME headers not to be returned

Returns:

all of the MIME headers in this AttachmentPart object except those that match one of the names in the given array. The nonmatching MIME headers are returned as an Iterator object.

getBase64Content

public abstract java.io.InputStream getBase64Content()
                                              throws SOAPException

Throws:

SOAPException

getRawContent

public abstract java.io.InputStream getRawContent()
                                           throws SOAPException

Throws:

SOAPException

getRawContentBytes

public abstract byte[] getRawContentBytes()
                                   throws SOAPException

Throws:

SOAPException

setBase64Content

public abstract void setBase64Content(java.io.InputStream inputstream,
                                      java.lang.String s)
                               throws SOAPException

Throws:

SOAPException

setRawContent

public abstract void setRawContent(java.io.InputStream inputstream,
                                   java.lang.String s)
                            throws SOAPException

Throws:

SOAPException

setRawContentBytes

public abstract void setRawContentBytes(byte[] abyte0,
                                        int i,
                                        int j,
                                        java.lang.String s)
                                 throws SOAPException

Throws:

SOAPException